Slewing ring factory tells you how to deal with noise in parts

2019-06-25

Many people have encountered long-term use of slewing bearings and there will be some noise, so how to deal with this situation? the followingSlewing Ring FactoryLet's take a look at the common noise of this kind of parts and how to deal with it.
First of all, if there is dust or other small foreign objects in the slewing ring, non-periodic vibrations will occur. This is the dust sound often referred to by experts. The noise in this case is different from the vibration that occurs. Sometimes there are sometimes not.

The correct way to control this kind of noise is to clean the inside of the slewing ring. The related parts including the bearing emptying need to be cleaned strictly, and the foreign matter in the smoothing agent should also be cleaned, so as to avoid the use of materials. Impurity causes noise.
If the appearance of this equipment is cracked or damaged, rusted, etc., it may show vibration and noise like riveting rivets, and many of these noises are definitely related to the rotation of machinery, if not corrected. , A large number of cracks will appear in the channel.

For this kind of noise, we need to pay special attention not to knock the bearing when installing the slewing ring. After assembling the bearing together, install it in the bearing housing and avoid the installation of the device. If it is in stock, please remember Avoid bearing rust, avoid shock between them during transportation, and use adhesive smooth elements to cause noise at some time; most of the occurrences of this situation are caused by incorrect selection of smoothing agents, smooth Insufficient agent will cause aging or induration. For this situation, you need to choose a suitable smoothing agent and use an appropriate amount of smoothing agent.