1. First of all, you must buy a real slewing ring. If you buy a fake slewing ring, it won’t last long.
2. Before the equipment slewing bearing, firstly check whether the slewing bearing is lack of oil and whether it is clean. Then, after checking the parts of the equipment and machinery, after determining the grease and cleaning, the slewing bearing should be correctly equipment.
3. The slewing bearing is fully equipped for trial. In the future, the slewing bearing will work on trial. After working for a while, there is no abnormality found in the inspection, and the slewing bearing can be used normally.
4. To check on time, the lubrication of each type of slewing ring is very important, and there is no exception for the slewing ring. When protecting the slewing ring, first check whether the surface of the slewing ring is clean. If it is not clean enough, then first Rinse it with gasoline or alcohol, and then the most important part is grease. Don't add too much grease when applying grease to the slewing ring. Just apply a little grease to conflict between the two. If there are contaminants, you can feel it. When using grease for the slewing ring, avoid contact with any part of the slewing ring with cotton fabric, as this will cause some residual fibers to roll and cause damage. It is good to determine the time of each inspection, and then check whether it is lack of oil and clean according to the normal time. Doing these points can make the slewing ring a long life.
When using slewing ring/slewing ring bearings, special attention should be paid to avoid debris from entering the bearing to reduce the wear process of the slewing ring bearing.
The slewing ring/slewing ring bearing itself has a better protection method, but assuming that no better quality lubricant is used, the lubricant will be scarred during use, which will seriously affect the running function of the slewing ring/slewing ring bearing In such working conditions for a long time, the bearing itself is a vicious expense, so when choosing grease, remember to choose a lubricant with no residual effect.
